|
SERVIZI DI VERIFICAZIONE
PERIODICA PER AMF
MOTORE INTERNO
| |
CAMF SCANNER
DATALOGIC
DX8200 
Specifiche
| ELECTRICAL CHARACTERISTICS |
| Power Supply: 20 to 30 Vdc,
30 W or 85 to 264 Vac, 50 to 60 Hz, 30 VA depending on the model used |
 |
| MECHANICAL CHARACTERISTICS |
| Dimensions: 576 x 513 x 153
mm (22.7 x 20.2 x 6.0 in) |
| Weight: 22 Kg (48.5 lbs)
approx. |
| PERFORMANCE |
| Light Source: Visible Laser
Diode (650 nm) |
| Light Receiver: Avalanche
photodiode |
Max. Resolution Code:
DX8200-XX0X (Standard) 0.30 mm (12 mils)
DX8200-X1XX (High) 0.25 mm (10 mils) |
| Reading Pattern: Single
cross |
| Scan Rate: 1000 scan/s (500
scan/s for each scan line) |
| Depth Of Field: See reading
diagram in the installation manual (Applicazioni and bar code dependent) |
| Conveyor Coverage: See
reading diagram in the installation manual (Applicazioni and bar code
dependent) |
| Readable Codes: The most
common symbologies incl. 2/5 family, Code 39, Code 128, EAN/UPC, EAN 128 |
| Code Autodiscrimination: Up
to 5 different codes |
Serial Interface Card: Main
interface: RS232/RS485/20 mA C.L.
Baud rate: 1,200 to 57,600 bauds
Aux. interface: RS232/RS485 |
Bus Interface Card: Main
interface LONWORK
Baud rate 1.250 Mbauds |
| Input Signals: 2x ‘Presence
Sensor’ and 1 ‘Encoder’ (NPN/PNP transistor) |
| Output Signals: ‘No read’,
‘Right code’ (NPN transistor open collector and emitter) |
| Set Up: Via serial port
commands and Windows™ based software program |
| Operating Modes (serial):
‘On line’, ‘Serial on line’, ‘Automatic’, ‘PackTrack’, ‘Test’ |
| Led Indicators: 6 LED
status indicators |
| Laser Classification: IEC
825 Class 2 |
| Laser Control: Security
system to turn laser Off in case of motor slow down or failure |
|
|
| Caratteristiche Ambientali |
| Operating Temperature: 0 to
45°C (32 to 113°F) |
| Storage Temperature: -20 to
70 °C (-4 to 158 °F) |
| Humidity: 90% non
condensing |
| Vibration Resistance: IEC
68-2-6 test FC, 1.5 mm @ 5 to 8.9 Hz; 0.5 G @ 8.9 to 150 Hz; 2 hours on each
axis |
| Shock Resistance: IEC
68-2-27 test EA 15 G, 11 ms; 3 shocks on each axis |
| |
|
